The type of vehicle normally found within factories, warehouses and other work locations where moving heavy materials from one location to another is necessary is referred to as a forklift. The mast is the mechanism located on the front of the forklift which hydraulically lowers and lifts the load. The "cat" is the area that is protected where the forklift operator sits.
Forklifts can lift loads that weigh between one to five tons. Several kinds can be utilized to carry shipping containers and loads that are a lot heavier.
The tires of a forklift should be checked and maintained regularly. The kinds of tires on different forklifts vary according to factors like for instance weight of the loads, ground surfaces and frequency of use. Every driver of a forklift should have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
Carry out tire inspections regularly. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40 percent, it has to be replaced.
When buying tires, make sure that you are purchasing the right type - solid, pneumatic or polyurethane.
When the tire needs replacing, position the forklift jack under the tire and raise the forklift high enough that you could change the tires easily.
You can utilize the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and secure it properly. If you are changing more than one tire and you only have one jack, lower the forklift, and after that reposition the jack at the next tire.
A repair company could provide on-site tire repair. If the tire is extremely large for both mobile and in-house tire presses, the damaged tire should be transported to a shop which has a stationary tire press.