Forklift Battery Safe Installation and Charging
Batteries utilized in forklifts are pricey pieces of equipment that are fairly big weighing many pounds. The job of charging and installation of these batteries is something which will need to be planned out ahead of time so as to make certain that these methods could be done safely and correctly. Maintaining a sound charging method and proper handling can majorly increase the battery's regular life span.
Standard Charging
It is suggested that the battery is not connected to the charger until it is at or less than 20 percent capacity. By charging the battery when it is higher than 20%, the lifespan of the battery can actually be shortened. On roughly every 5th charge cycle, the charger has to be set on the equalize or weekend setting, depending on which type of charger you are utilizing.
The cycle of charging must not get interrupted. You should avoid utilizing the battery for a few hours when the charge cycle is complete. By practicing these procedures, you could help ensure that you get the maximum battery performance available.
Charger Maintenance
Make certain the charger is turned off prior to hooking up the battery to the charger. You then can connect the charger to the battery. This is a common mistake that could inadvertently cause damage to both the charger and the forklift. Moreover, it is very important that the battery amperage should match that of the charger.
The battery must never be allowed to to deep discharge or to completely discharge. This will ultimately shorten the lift of the battery and could even prevent the charger from being able to start. If the battery charger reads that there is no battery activity, it will not start the charge cycle. If this situation happens, a technician must be called in order to re-set the charger prior to charge being able to start.