Call Sales Rep: 1-888-314-1680
2016 TAYLOR TXH350L Image
Stock Number: EQU020041
Make: TAYLOR
Model: TXH350L
Year: 2016
2016 TAYLOR TXH350L Details
2012 Manitou 48" Forks Image
Stock Number: ATT203
Make: Manitou
Model: 48" Forks
Year: 2012
2012 Manitou 48" Forks Details
2011 JLG Truss Jib 12' Image
Stock Number: ATT159
Make: JLG
Model: Truss Jib 12'
Year: 2011
2011 JLG Truss Jib 12' Details
2010 Capacity TJ5000 DOT Image
Stock Number: EQU012898
Make: Capacity
Model: TJ5000 DOT
Year: 2010
2010 Capacity TJ5000 DOT Details
2016 JLG 450AJ Image
Stock Number: 300714
Make: JLG
Model: 450AJ
Year: 2016
2016 JLG 450AJ Details
2015 FrostFighter IDF350 Image
Stock Number: EQC003202
Make: FrostFighter
Model: IDF350
Year: 2015
2015 FrostFighter IDF350 Details
 
Daewoo Propane Forklifts Salt Lake City

Daewoo Propane Forklifts Salt Lake City

Change a Propane Tank

Forklifts fueled by propane are common inside warehouse settings. These forklifts have a propane mount located at the back of the driver. These tanks need to be replaced periodically as they have limited lifespans. Operators of forklifts must use care when handling propane tanks. Compressed gases are dangerous, specially since the gas is flammable. Utilize care when removing and replacing propane tank to avoid injury.



1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This process burns the gas off inside the transfer hose that connects the engine and the tank. Prior to taking the second steps, wear the correct safety equipment, such as insulated gloves made of either neoprene or leather. It is vital for you to protect your skin from contact with the compressed gas, that is extremely cold.

2 The hose of the tank needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reattach the hose at the valve of the tank.

3 Leaks could be checked simply by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to froth from around the valve. If this occurs, check the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the valve area, and after that perform the leak checking procedure again. Persistent leaks mean that both the connecting hose and nut should be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank must be replaced.

4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. Afterward you could start the lift truck and continue working.

  • Clark Warehouse Forklifts Salt Lake City
    Forklift Safety Rules and Tips Each and every year, there are roughly 20,000 cases of accidents that are connected to using forklifts in the United States alone. And each and every year about 100 deaths... More
  • Liebherr Construction Cranes Salt Lake City
    During the year 1949, the Liebherr family business was established by Hans Liebherr. His first claim to fame was the success of his affordable and easy-to-assemble mobile tower crane. It was upon this creation that... More
  • Haulotte Electric Boom Lifts Salt Lake City
    The electric boom aerial lift allows personnel to carry out maintenance and building work at heights which were not previously accessible. An electric boom is designed with a work platform which can be lifted to... More
  • Jungheinrich Cushion Tire Forklift Salt Lake City
    Pneumatic Tires The majority of tires utilized in modern times are considered to be pneumatic tires. The use of rubber in tires enabled the creation of pneumatic tires which allowed for a much more comfortable... More
  • Yale Propane Forklifts Salt Lake City
    Narrow aisle lift trucks work by increasing the ratio of the storage space to the width of the aisle. Yale features the double reach NDR and the single reach NR units for aisle widths of... More